Australia’s Comfort Company
Most commercial HVAC maintenance contracts look fine on page one. The differences are in the detail. A good contract names every unit it covers, when each one is serviced, how fast someone comes when one fails, what parts and labour cost extra, what reports you get and what’s excluded.
So if you’ve got a renewal coming up, or three quotes on your desk that all call themselves “comprehensive”, here’s how to read them properly.
In plain terms, it’s the agreement between your building and whoever looks after its air conditioning, ventilation and heating. It covers the planned visits, the breakdowns in between, and who pays for what.
You’ll see the phrase planned preventative maintenance a lot. That’s service booked ahead, so small faults get caught before a unit dies on the hottest day of the year. You’ll also see SLA, short for service level agreement. That’s the part with actual numbers in it.
Start with the scope. Everything else hangs off it.
Ask for an asset register as part of the contract, not a sentence saying “all plant on site”. A real register lists each unit by make, model, serial number and where it lives. Better still, take it up on the roof and tick things off. Units that aren’t on the list usually aren’t covered, and you don’t want to find that out during a breakdown.
Each item also needs a service frequency and a task list the technician works from. You don’t have to write that list. Our annual HVAC maintenance checklist and guide to maintaining a commercial HVAC system show what a proper visit looks like. For bigger plant, read how often industrial air conditioning should be serviced.
Cooling towers are the big one in NSW. Under the Public Health Act 2010 and Public Health Regulation 2022, the occupier needs a risk management plan, monthly Legionella testing and a yearly independent audit. Often a water treatment company does that work, not your HVAC contractor. That’s fine. Just make sure the contract says so, because “we thought they were doing it” won’t help at audit time. NSW Health has the full rules. AS/NZS 3666 covers the technical side, but it’s a paid standard, so check details there.
Then there’s fire mode. Since 13 February 2026, NSW buildings in classes 1b and 2 to 9 must have essential fire safety measures tested to AS 1851-2012. The Building Commission NSW says a hard-copy logbook has to stay on site for at least seven years. Smoke dampers, stair pressurisation and smoke exhaust often live inside the HVAC system. Ask whether your HVAC contractor or your fire contractor tests them, and get the answer written into the contract. AS 1851 is paywalled too, so confirm specifics in the standard.

Programmed maintenance is the work you plan. Breakdown cover is what you get when something fails anyway. Plenty of quotes bundle both, and that’s usually where the price differences hide.
| Comparison | Programmed maintenance | Breakdown cover |
|---|---|---|
| What it is | Scheduled visits to inspect, clean and test. | Call-outs when something fails between visits. |
| Usual pricing | Fixed fee per visit, quarter or year. | Call-out fee plus labour, or a set number of call-outs included. |
| What it protects | Efficiency and early warning of faults. | Downtime once a fault happens. |
| What to check | Visit frequency and the task list. | Response times, after-hours rates and repair approvals. |
Some providers include a set number of call-outs in the annual fee. Others charge for every one. Either can work. You need to know which you’re signing up for.
Got a quote in front of you? Answer Air Services sets up programmed maintenance and breakdown contracts for commercial buildings across Western Sydney. Talk to us about your contract and we’ll go through the scope with you, line by line.
“Prompt response” means nothing. Ask what the clock is actually measuring.
A commercial HVAC maintenance contract can time three different things: how fast someone answers your call, how fast a technician gets to site, and how fast the fault gets fixed. Plenty of quotes only promise the first. The good ones say which clock they mean, and set separate targets for critical, urgent and routine faults.
A server room losing cooling isn’t the same as one office running warm, so the targets shouldn’t be the same either. We’ve left hours off this page on purpose. Ask each provider for theirs in writing, then compare like with like.
Two more things to check. Are after-hours calls included, or charged at a higher rate? And what does the target cover: a make-safe or the full repair? A make-safe is a temporary fix that stops the damage, like isolating a leaking unit, until the real repair happens. Those are very different promises.
A lot of contract arguments start here, usually over the word “included”.
Labour on scheduled visits is normally in the fixed fee. Repair labour often isn’t. Parts tend to fall into three camps: included, included up to a cap, or not included. Your contract should say which.
Consumables are the cheap stuff that gets used up, like filters and belts. Ask which ones the fee covers. Refrigerant is often charged by the kilo, so ask how leaks get found and fixed before more gas goes in.
Then there’s the approval limit. That’s how much a technician can spend on a repair before calling you. Set it too low and small jobs sit waiting. Set it too high and you find out when the invoice turns up. Call-out fees, travel and after-hours rates belong in the contract too, not on the first bill.
After every visit you should get a service report showing what was serviced, what was found and what needs fixing, ideally with photos and a quote. A short “no faults found” is fine. Silence isn’t.
The asset register should stay current as equipment is added or replaced, and the contract should say the data is yours. You’ll need it if you ever change providers.
Compliance paperwork, like cooling tower results and the AS 1851 logbook, needs its own line because it feeds straight into your annual fire safety statement.
Every contract has exclusions. The trouble is finding them on an invoice instead of in the quote. The usual ones are faults that existed before the contract started, old units where parts are no longer made, access costs like cranes or scaffolding, damage caused by tenants or builders, major components such as compressors, and changes made during a fit-out.
The first is easy to deal with. Ask for a start-up condition report before the contract begins, so you both agree on where things stood.
Run each quote through this. Anything in the right-hand column deserves a phone call before you sign.
| Item | What good looks like | Red flag |
|---|---|---|
| Asset list | Every unit listed by make, model, serial number and location. | “All plant on site” |
| Visit frequency | Set according to each asset type. | One frequency for everything. |
| Response times | Defined by priority, with on-site response times specified. | “Prompt” or “fast” |
| Parts and labour | Inclusions, caps and exclusions clearly spelled out. | “All-inclusive” with no detail. |
| After-hours | Rates clearly stated. | Not mentioned. |
| Reporting | A report provided after every visit. | Nothing in writing. |
| Compliance plant | Cooling tower and fire-mode duties clearly assigned. | No clarity on who does what. |
| Licences | Licence details shared on request. | Reluctance to share details. |
| Term and exit | Clear notice period and price review terms. | Automatic renewal with no clear way to exit. |
And be careful with “everything included” at a low price. Nobody covers everything. The catch is usually in the terms and conditions.
Line the quotes up against the same scope. The cheapest one often covers less. Check licences while you’re at it. Under the Ozone Protection and Synthetic Greenhouse Gas Management Regulations 1995, anyone working on refrigeration and air conditioning equipment needs a refrigerant handling licence. You can check licence status through the Australian Refrigeration Council. Our post on what HVAC accreditation means for your business goes further.

That comes down to your lease, and it varies more than people expect. Our guide to air conditioning maintenance in a commercial lease in NSW walks through it.
Answer Air Services is a commercial mechanical services contractor in Glendenning with more than 20 years in the industry. Our technicians hold ARC refrigerant handling licences. Ask us for a maintenance contract quote and we’ll lay out the scope, response times and reporting in plain English before you sign anything.
Sometimes. Some contracts include a set number of breakdown call-outs in the annual fee. Others charge for every one at an hourly rate, plus parts. Neither is wrong, but you need to know which you’re getting. Check the breakdown section of the quote for response times and after-hours rates too.
Response time is how quickly the provider reacts. That could be a call back or a technician on site. Resolution time is how long it takes to fix the problem. Plenty of quotes only promise a response, so ask which one each target in your contract is actually measuring.
Not automatically. NSW requires a risk management plan, monthly Legionella testing and a yearly independent audit for cooling towers. Some HVAC contractors do this work. Some buildings use a separate water treatment company instead. Either is fine, as long as your contract names who’s responsible, so nothing slips between providers.
In NSW, the building owner is responsible for making sure a hard-copy logbook stays on site, with records kept for at least seven years. The contractor doing the testing fills it in. Your HVAC contract should say whether that’s them or your fire contractor, so the dampers don’t get missed.
Usually, but only on the terms you signed. Look for the notice period, any exit fees and whether the contract renews itself automatically. Also make sure you get your asset register and service history back. Without them, the next provider starts from scratch, and you pay for that time.